PORTWELL ROBO-8713BVG2
Specifications
System Chipset
Intel 865G
Form Factor
PICMG
Video Chipset
Intel 865G
Audio
AC'97 interface reserved
BIOS
Award BIOS
Chipset/Core Logic
Intel 865G and ICH5
Dimension
338.5(L) x 122(W) mm ; 13.33"(L) x 4.8"(W) PCB: 6-layer
Display Interface
Support CRT interface up to QXGA 75Hz (2048x1536)
Ethernet
Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet;PCI interface based Gigabit Ethernet;Dual RJ-45 connectors with two LED indicators
Expansion Interface
N/A
Graphic Controller
-GMCH integrated Intel Extreme graphics 2 technology;High performance 3D setup & render engine and hardware motion compensation for MPEG2
Graphic Memory
Intel Dynamic Video Meomory Technology (DVMT) 2.0 shares system memory
Hardware Monitoring
System monitor (fan, temperature, voltage)
IrDA
IrDA 1.0
Keyboard & Mouse
Two USB 2.0 ports on bracket dedicated to keyboard & mouse
MIO
Two serial (RS-232x1, selectable RS-232/422/485x1), one parallel and one FDD channel
MTBF
TBA
Operating Temperature
0 to 55oC
Power Requirement
Typical : +5V@0.8A; +12V@7.5A
Processor
CPU & Package: Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D processor in the LGA-775 package FSB: 1066/800/533MHz
Intel Pentium D
Relative Humidity
5% to 90%, non-condensing
Solid State Disk
N/A
Storage Devices
EIDE: Support four EIDE devices with Ultra DMA 100/66/33 SATA: Support dual SATA 150 drives
Storage Temperature
-20 to 80oC
System Memory
Up to 2GB DDR 400/333/266 SDRAM on dual 184-pin DIMM socket
USB
Eight USB 2.0 ports
Watchdog Timer
Programmable via software from 0.5 sec. to 254.5 min
Features
- Eight plug-and-play USB 2.0 ports allows enriched expansion of the system that build upon the board
- Extreme cost / performance PICMG 1.0 single board computer that support LGA 775 processor with dual Gigabit Ethernet controller
- Integrated Intel Extreme Graphics 2 graphics engine that offers adequate display quality via VGA interface
- Over-clocking extended the board supports 2nd generation, lower power consumption / thermal profile Core 2 Duo processor
- Single side design (standard model without ISA support) enhance reliability of production and simplify its process at the same time
- Verities I/O interface that includes dual IDE channel, dual SATA port, single FDD channel, dual serial and single parallel port
Datasheet
Extracted Text
® Intel Core 2 Duo processor based PICMG SBC with DDR SDRAM, VGA, Dual Gigabit Ethernet, ROBO-8713BVG2 and USB COM2 Two SATA ports Two 184-pin DIMM sockets COM1 (RS-232/422/485 selectable) Two IDE connectors +12V power connector Parallel port FDD port PS/2 keyboard & mouse Two USB ports Dual GbE port VGA port ® Six USB ports ® Intel 865G Intel ICH5 LGA 775 socket Standalone Power Source ISA Bus (optional support) FEATURES GENERAL ® ® ® ® CPU & Package: Intel Core 2 Duo, Pentium D, Pentium 4, Celeron D Processor � Extreme cost / performance PICMG 1.0 single processor in the LGA-775 package board computer that support LGA 775 processor FSB: 1066*/800/533MHz with dual Gigabit Ethernet controller ® Intel 865G and ICH5 Chipset/Core Logic � Verities I/O interface that includes dual IDE System Memory Up to 2GB DDR 400/333/266 SDRAM on dual 184-pin DIMM socket channel, dual SATA port, single FDD channel, BIOS Award BIOS dual serial and single parallel port EIDE: Support four EIDE devices with Ultra DMA 100/66/33 Storage Devices SATA: Support dual SATA 150 drives � Over-clocking extended the board supports 2nd generation, lower power consumption / thermal Solid State Disk N/A profile Core 2 Duo processor Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min. ® � Integrated Intel Extreme Graphics 2 graphics N/A Expansion Interface engine that offers adequate display quality via Hardware Monitoring System monitor (fan, temperature, voltage) VGA interface Typical : +5V@0.8A; +12V@7.5A Power Requirement � Single side design (standard model without ISA Dimension: 338.5(L) x 122(W) mm ; 13.33"(L) x 4.8"(W) Dimension support) enhance reliability of production and PCB: 6-layer simplify its process at the same time o Operating Temperature: 0 to 55 C Environment o � Eight plug-and-play USB 2.0 ports allows Storage Temperature: -20 to 80 C Relative Humidity: 5% to 90%, non-condensing enriched expansion of the system that build upon the board TBA MTBF I/O Two serial (RS-232x1, selectable RS-232/422/485x1), one parallel and one MIO FDD channel IrDA 1.0 IrDA -Dual 10BASE-T/100BASE-TX/1000BASE-T Ethernet Ethernet ORDERING GUIDE -PCI interface based Gigabit Ethernet -Dual RJ-45 connectors with two LED indicators ROBO-8713BVG2 Audio AC'97 interface reserved Standard LGA-775 processor based PICMG 1.0 SBC with Eight USB 2.0 ports USB DDR SDRAM, VGA, Dual Gigabit Ethernet and Two USB 2.0 ports on bracket dedicated to keyboard & mouse Keyboard & Mouse USB USB cable with bracket Optional DISPLAY Four USB ports with bracket ® PS/2 Keyboard/Mouse Cable with Bracket Graphic Controller -GMCH integrated Intel Extreme graphics 2 technology PS/2 keyboard/mouse connectors on bracket -High performance 3D setup & render engine and hardware motion Low Profile LGA775 Cooler compensation for MPEG2 ® High efficiency slim cooler that increases reliability Intel Dynamic Video Meomory Technology (DVMT) 2.0 shares system memory Graphic Memory of system up to 64MB " " Represents to be "over-clocking" Display Interface Support CRT interface up to QXGA 75Hz (2048x1536) *
Frequently asked questions
What makes Portwell Boards unique?

What kind of warranty will the ROBO-8713BVG2 have?

Which carriers does Portwell Boards work with?

Will Portwell Boards sell to me even though I live outside the USA?

I have a preferred payment method. Will Portwell Boards accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods